Oki MICROLINE ML380 Maintenance Manual page 277

10) Maximum number of dot columns per line in graphics.
(a) Character to character clearance can be specified in units of dot columns with control
codes.
ML380 Turbo
ML381 Turbo
(b) If character-to-character clearance or proportional spacing is specified, or if a line
contains both bit image graphics and text, the following values in terms of dot columns
are used:
Print Mode
UTILITY
LQ
11) Line feed pitches
6 LPI
8 LPI
A variable line feed pitch of n/60, n/72, n/180, n/216 or n/360 inch can also be specified.
12) Line feed time
6 LPI
8 LPI
Continuous paper feed rate is at 5.0 inches per second.
13) Paper feed control by software
(a) 8-channel vertical format unit (VFU)
(b) Page control (with TOF function)
(c) Automatic skip-over-perforation available
40959201TX Rev.1
Single density
60 DPI
80 DPI
90 DPI
60 DPI
80 DPI
90 DPI
Model
10 CPI
ML380 Turbo 960
ML381 Turbo 1,632
ML380 Turbo 2,880
ML381 Turbo 4,896
0.167 inch (4.23 mm)
0.125 inch (3.175 mm)
65 ms
56 ms
Double density
480 960
640
720 1,440
816 1,632
1,088
1,224 2,448
Character pitch
12 CPI 15 CPI
960 960
1,632 1,632
2,880 2,880
4,896 4,896
Quadruple density
1,920
2,880
3,264
4,896
17.1 CPI 20 CPI
1,920 1,920
3,264 3,264
2,880 2,880
4,896 4,896
12 /