SATO M-5900RV Operator And Technical Reference Manual page 86

Section 4. Programming Reference
Special Notes
1. This command must be immediately followed by the <ESC>BW Bar Code Expansion
command (see Page 4-18).
2. You may use only one variable ratio bar code per label.
3. If the data specified in this command is incorrect, the command is ignored and the
ratio used will be based on the previous setting.
4. See Appendix B for more specific instructions and details regarding individual bar
code symbols.
Page 4-20
SATO M-5900RV Operator and Technical Reference Manual
PN 9001081
Rev. C