SATO M-5900RV Operator And Technical Reference Manual page 103

Printer Output
Special Notes
PN 9001081
Rev. C
1. Characters may be enlarged through the use of the Character Expansion
command (see Page 4-25).
2. Character spacing may be altered through the use of the Character Pitch
command (see Page 4-28). The default is 2 dots between characters. It is
recommended to use a spacing of 5 dots for OCR-A and 1 dot for OCR-B.
3. You may also create custom characters or fonts. See the <ESC>T Custom-
Designed Characters command (Page 4-23).
4. A font must be defined for each field to be printed. There is no default font.
5. Fonts U, S, M, OA and OB are identical to fonts U, S, M, OA and OB on the
SATO M-5900RV printer.
6. The proportionally spaced fonts XU, XS, XM, XL and XA can be printed with
fixed spacing using the <ESC>PS Proportional Space command.
SATO M-5900RV Operator and Technical Reference Manual
Section 4. Programming Reference
Page 4-37