Character Expansion - SATO M-5900RV Operator And Technical Reference Manual

Section 4. Programming Reference
Printer Output
Special Notes
1. When printing the custom character using the Recall command, the character is
affected by the following commands:
Character Expansion (see Page 4-25)
Character Pitch (see Page 4-28)
Line Feed (see Page 4-52)
Rotate, Fixed Base Reference Point (see Page 4-70)
Rotate, Moving Base Reference Point (see Page 4-72)
2. The characters are stored in volatile memory and must be reloaded if the printer
power is lost.
3. Do not use ASCII <CR> or <LF> characters (carriage return or line feed) as line
delimiters within the graphic data or the actual image will not be printed as specified.
Page 4-24
SATO M-5900RV Operator and Technical Reference Manual
PN 9001081
Rev. C