Table of Contents
Advertisement
Operation
Energy management
To save energy, the dishwasher will
switch off automatically 10 minutes
after the last time a button has been
pressed or 10 minutes after the end of
the programme (see "Programme
options, Optimise standby").
Press the button to switch the
dishwasher back on.
The dishwasher will not switch off
whilst a programme is running, during
the Delay start period or if there is a
fault.
At the end of the programme
At the end of a programme, the In-
operation indicator light will be visible
flashing slowly with the door shut. The
buzzer might also be sounding.
The In-operation indicator light or time
display as applicable will go out
10 minutes after the programme has
finished.
During the drying phase, the door may
open slightly and briefly show how long
the programme has left to run. The time
display will then go out and the
symbol will start to flash.
Press any button to see how long the
programme has left to run.
The programme has ended when .
appears in the display.
With the QuickPowerWash programme
the door will not open until a few
minutes after the programme has
finished.
54
The drying fan may continue to run for
a few minutes at the end of the
programme.
Open the door fully so that the door
catch rail retracts again.
You can now empty the dishwasher.
If you have deactivated the
automatic door opening function (see
"Programme options, AutoOpen")
and would like to open the door as
soon as the programme has finished,
make sure that you open the door
fully.
Otherwise steam from the
dishwasher could damage the edge
of the worktop because the fan is no
longer running.
Advertisement
Table of Contents
