Xcp Issues Fixed In Xcp 1092 - Fujitsu Sparc Enterpise M8000 Product Notes

Known Issues and Workarounds in XCP 1092 (Continued)
TABLE 4
ID Description
RTIF1- When you start up a domain from a disk that
100331-002 is connected to the 8Gbps fibre channel card
(SE0X7F21F, SE0X7F22F) and if it is unable to
start the domain due to causes such as disk
failure, an error log of "FRU: /UNSPECIFIED"
might be registered.

XCP Issues Fixed in XCP 1092

TABLE 5
XCP Issues Fixed in XCP 1092
TABLE 5
ID Description
RTIF1- In the setting of the LDAP server, the number
090427-004 of characters which can be specified differs
between XSCF Web and XSCF Shell. On XSCF
Web, you can enter up to 128 characters.
RTIF1- The XSCF might go down and require a
090824-001 reboot, or you might see console error
messages and a core dump
(ereport.chassis.software.core) when
one of these conditions occurs:
• A local account has been created with a user
ID explicitly assigned to a value larger than
65536 (adduser -u uid).
• An LDAP account has been used that has a
UID value larger than 65536.
RTIF1- While Active Directory is enabled, if you log in
091021-001 to XSCF using the user name that registered in
the Active Directory server, the
showconsolepath(8) command displays not
the log-in user name but "proxyuser."
RTIF1- In XSCF, a host route cannot be set. When you
091109-002 use the setroute(8) command and set the
netmask to 255.255.255.255, it returns an
invalid parameter.
lists XCP issues fixed in XCP 1092.
Workaround
No workaround is available.
Workaround
To set 129 characters or more, use XSCF Shell.
Use only user accounts with a user ID (UID)
value between 100 and 60000. This is the range
of auto-assigned UIDs for the XSCF command
adduser(8).
No workaround is available.
To set a host route, do not specify the netmask
(-m option).
Information About Software 33