Identifying Permanent Memory In A Target Board - Fujitsu Sparc Enterpise M8000 Product Notes

Identifying Permanent Memory in a
Target Board
1. Log in to XSCF.
2. Execute the following command:
XSCF> showdevices -d domain_id
The following example shows a display of the showdevices -d command where 0
is the domain_id.
XSCF> showdevices -d 0
...
Memory:
-------
board
DID XSB mem MB
00 00-0 8192
00 00-2 8192
00 00-3 8192
...
The entry for column 4 perm mem MB indicates the presence of permanent memory
if the value is non-zero.
The example shows permanent memory on 00-2, with 1674 MB.
If the board includes permanent memory, when you execute the deleteboard(8)
command or the moveboard(8) command, the following notice appears:
System may be temporarily suspended, proceed?
perm base
mem MB address
0 0x0000000000000000
1674 0x000003c000000000
0 0x0000034000000000
domain target deleted remaining
mem MB XSB mem MB
24576
24576
24576
[y|n]:
Information About Software
mem MB
75