Software Documentation Updates - Fujitsu Sparc Enterpise M8000 Product Notes

Software Documentation Updates

This section contains late-breaking software information that became known after
the documentation set was published and corrections in the SPARC Enterprise
M8000/M9000 servers software documentation.
The corrections for SPARC Enterprise M3000/M4000/M5000/M8000/M9000 Servers
XSCF Reference Manual, if not otherwise specified, also apply to the man pages which
XSCF provides. And they supersede the information on the man pages.
TABLE 13
Software Documentation Updates
TABLE 13
Title
SPARC Enterprise
M3000/M4000/M5000/
M8000/M9000 Servers
XSCF Reference Manual
and XSCF man pages
SPARC Enterprise
M3000/M4000/M5000/
M8000/M9000 Servers
XSCF Reference Manual
lists known documentation updates.
Page Number Update
The description of email operand will be changed as follows:
sethttps(8)
command
"Specifies an E-mail address using up to 64 characters. If "-c
selfsign" or "-c gencsr" is specified, do not specify the
value with only spaces."
The setad(8), setldapssl(8), setpacketfilters(8),
showad(8), showldapssl(8), and showpacketfilters(8) will
be added. See the man pages of each command.
Added the following information: "If the Service Processor is
adduser(8)
command configured to use Lightweight Directory Access Protocol
(LDAP), Active Directory, or LDAP/SSL for user account data,
the user name and UID (if specified) must not already be in use
locally or in LDAP, Active Directory, or LDAP/SSL."
The maximum values of several options will be changed like as
password(8)
and follows:
setpasswordp
Example) password -i: Valid values are integers with value of
olicy(8)
-1 - 999999999.
commands
Added the following text:
setdscp(8)
command
"The specified netmask must be a subset of the default netmask
based on network class."
The following description will be added in DESCRIPTION:
setdualpower
feed(8)
The dual power feed mode cannot be used with 100V power on
command
the M4000/M5000 servers.
Information About Software 69