Fujitsu Sparc Enterpise M8000 Product Notes page 55

XCP Issues Fixed in Releases Earlier Than XCP 1092 (Continued)
TABLE 6
ID Description
RTIF1- The following messages are displayed and you
071129-004 might not boot Solaris OS:
• Abnormal OpenBoot environment
variable Boot process failed
• ERROR: Invalid token '' FATAL:
NVRAM contents corrupt;
Reinitializing NVRAM parameters.
RTIF1- In XSCF, write of date and time may become
071227-001 an error. When the domain powered on, the
following message may appear and the
domain may fail to be powered on.
Poweron canceled due to invalid
system date and time.
RTIF1- When the showhardconf(8) command
071227-002 executed in an environment with the External
I/O Expansion Unit, the showhardconf(8)
command may appear as if hang up.
RTIF1- When a non-existent device name specified to
071227-003 the Boot device path and resulted in the OS
Boot error, the status of I/O unit may become
"Degraded."
Workaround
Confirm the OpenBoot PROM environment
variable. If the variable has errors, set the
variable again.
Execute the rebootxscf(8) command to
restart XSCF.
Press Ctrl-C to terminate the
showhardconf(8) command and execute the
showhardconf(8) command again.
Specify the correct device name to the Boot
device path.
When the status of I/O unit became
"Degraded," replace the I/O unit.
Information About Software 43