Patches For Solaris 10 8/07; Patches For Solaris 10 11/06; Patches For Emulex Pci Express (Pcie) Cards; Updating To Xcp 1092 - Fujitsu Sparc Enterpise M8000 Product Notes

Hide thumbs Also See for Sparc Enterpise M8000:
Table of Contents

Advertisement

Patches for Solaris 10 8/07

The following patches are required for Solaris 10 8/07 OS only on servers containing
SPARC64 VII 2.52GHz processors:
119254-51 or later
125891-01 or later
127755-01 or later
127127-11
For Solaris 10 8/07 OS on servers containing SPARC64 VII 2.88GHz processors,
apply all patches contained in the PTF R10021 or later. For more information on the
PTF, contact a sales representative or a qualified service engineer.

Patches for Solaris 10 11/06

The following patches are required for Solaris 10 11/06 OS. Note that Solaris 10
11/06 OS does not support SPARC64 VII processors, even with these required
patches:
118833-36 (Install 118833-36 before 125100-04.)
125100-04 or later
120068-03 or later
123839-07 or later
125424-01 or later
125075-01 or later
125670-02 or later

Patches for Emulex PCI Express (PCIe) Cards

The following Emulex cards require drivers supplied in patch 120222-26:
XSEFC402AF Sun StorageTek Enterprise Class 4Gb Dual-Port Fibre Channel PCI-
E HBA
XSEFC401AF Sun StorageTek Enterprise Class 4Gb Single-Port Fibre Channel PCI-
E HBA

Updating to XCP 1092

To update your XCP to XCP 1092, please pay attention to the following points
depending on your current XCP version.
4
SPARC Enterprise M8000/M9000 Servers Product Notes for XCP Version 1092 • April 2010

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sparc enterpise m9000

Table of Contents