Fujitsu Sparc Enterpise M8000 Product Notes page 71

Hide thumbs Also See for Sparc Enterpise M8000:
Table of Contents

Advertisement

Solaris OS Issues Fixed in Solaris 10 10/08 (Continued)
TABLE 10
CR ID
Description
6660197
DR might cause the domain to hang if either of
the following conditions exist:
• A domain contains 256 or more CPUs.
• Memory error occurred and the DIMM has
been degraded.
6679370
The following message may be output on the
console during the system booting, the
External I/O Expansion Unit adding by
hotplug, or the FMEMA operating by DR.
SUNW-MSG-ID: SUN4-8000-75, TYPE:
Fault, VER: 1, SEVERITY: Critical
...
DESC:
A problem was detected in the PCI-
Express subsystem.
Refer to http://sun.com/msg/SUN4-
8000-75 for more information.
...
6720261
If your domain is running one of the following
versions of Solaris OS, the system might
panic/trap during normal operation:
• Solaris 10 5/08 OS
• An earlier version of Solaris 10 OS with
patch ID 127127-11
Workaround
This has been fixed in patch 138397-01.
[Workaround]
1. Set the following parameterin the system
specification file (/etc/system):
set drmach:drmach_disable_mcopy = 1
2. Reboot the domain.
This has been fixed in patch 137137-09.
Note -
Before adapting the patch, delete the
following setting from /etc/system:
set pcie_expected_ce_mask = 0x2001
[Workaround]
Add the following to /etc/system and then
reboot the domain.
set pcie_expected_ce_mask = 0x2001
This has been fixed in patch 137137-09.
[Workaround]
Set the following parameter in the system
specification file (/etc/system):
set heaplp_use_stlb=0
Then reboot the domain.
Information About Software
59

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sparc enterpise m9000

Table of Contents