How To Modify An Existing Route; How To Change Waypoint Position - Furuno FMD-3200 Operator's Manual

4. Select the folder that contains the route(s) to be imported then click the [OK] but-
ton.
5. Check the route(s) to import then click the [Import] button.
9.5

How to Modify an Existing Route

9.5.1

How to change waypoint position

To change position of a waypoint you have the following choices:
• Enter latitude and longitude on the [Waypoints] page in the [Route Plan] dialog box.
• Drag and drop waypoint using the left button.
How to drag and drop waypoint to new position
1. Put the cursor on the route waypoint to move then push the right button to show
the context-sensitive menu.
2. Select [Edit].
3. Press and hold down the left button while rolling the trackball to move the cursor
to a desired position. Release the button when the cursor is at the desired posi-
tion. Right-click the display area to show the context-sensitive menu then select
[Finish].
How to change latitude and longitude from the Waypoints page
1. Show the [Waypoints] page.
2. Put the cursor on the digit to change in the Latitude or Longitude field.
3. Enter position from the Control Unit's keyboard, or spin the scrollwheel.
9. ROUTES
9-9