Tracking Page - Furuno FMD-3200 Operator's Manual

4. HOW TO CONTROL CHART OBJECTS
Velocity Vectors
Ship Vectors: Show or hide own ship vector.
Target Vectors: Show or hide target vectors.
Style: Select the vector style. The [std ECDIS] vector is a speed-referenced vector
symbol. [Conventional] is a simplified symbol.
Time Increments: Check to show ticks of velocity vector. This controls both own ship
and targets ticks. If ticks are too tightly spaced, they will be automatically removed
from the display, until spacing between ticks is sufficient to distinguish them separate-
ly. This depends on display scale and speed of vessel and target.
Path Predictor: Check to show the path predictor. The path predictor is a single
dashed line originating at the CCRP and drawn at a length to represent the distance
and path own ship will travel over the ground in the user-selected time interval for own
ship speed vector.
Radar Antenna: Check to mark position of radar antenna (with "x").
4.3.2

Tracking page

Own ship past tracks
System : Check to plot CCRP position.
Primary : Check to plot own ship's past track with position fed from sensor with highest
priority.
Secondary : Check to plot own ship's past track with position fed from sensor with 2nd
highest priority.
Style : Select time stamp position for past track (indicated by Tick or Point)
Length : Select length of past track.
Labels : Select label interval.
Events
Events marks are based on the [Voyage] log records.
User Events : Display event symbols on the chart. User events are recorded by click-
ing [Record], [Event Log] and [User Event] on the InstantAccess bar.
Auto Events : Display automatically entered event symbols, where the system has re-
corded an event based on conditions you have set. Auto events are recorded every 1-
4 hours.
Positions : Display the latitude and longitude of an event, recorded by clicking
[Record], [Event Log] and [POSN Event] on the InstantAccess bar.
Note 1: A MOB event is visible always.
4-7