17.10 Depth Sensor - Furuno FMD-3200 Operator's Manual

17. NAVIGATION SENSORS
Apparent, north or theoretical wind may be selected from the [Other Sensor Settings]
menu.

17.10 Depth Sensor

The depth output from a depth sensor (for example, echo sounder) is shown on the
[Other Sensor] page in the [Other Sensor Settings] menu.
The content of the [Other Sensor] page depends on sensors connected.
In this example there are three transducers (bow, mid and aft) installed.
130.7m Mid: 130.8m Aft: 130.8m
The system displays depth value as depth below the transducer. If required, you can
get an alert when the measured depth is less than the "Echo Alarm Limit" setting at
the [UKC] page in the [Overlay/NAV Tools] box. The system generates the Alert 485
"Depth Limit".
17-13