Conning And Mini Conning Displays; Conning Display - Furuno FMD-3200 Operator's Manual

21. CONNING AND MINI CONNING
DISPLAYS
21.1

Conning Display

The conning display provides relevant sensor information data (including engine data)
from external equipment, on one display to facilitate safe and efficient monitoring. The
ECDIS accepts sensor information data in analog, serial and contact signal formats.
Four sets of conning displays are available, and they are arranged at installation. Con-
sult with the installer of the equipment to decide the content and layout of each display.
To show the conning display, click the [Operating Mode] button on the Status bar to
select [CONNING].
Conning display Status bar (see next page)
Azimuth
17.5°
Pitch And Roll
ROLL PITCH
3.8° -2°
21-1