installation & connection
INSERTING/REMOVING AN SD MEMORY CARD
J
Disconnect the power cable from the camera before inserting the SD memory card.
Inserting an SD Memory Card
1. Open the cover in the rear of the camera.
(SNP-3302/3371)
Using the screw driver, loosen 4 screws by turning them
counterclockwise and separate the dome cover.
(SNP-3302H/3371H/3371TH)
2. Push the SD memory card in the direction of the
arrow shown in the diagram.
J
Do not insert the SD memory card while it's upside down
by force. Otherwise, it may damage the SD memory card.
40_ installation & connection