installation & connection
inSertinG/removinG a SD memory carD
Disconnect the power cable from the camera before inserting the SD memory card.
`
J
inserting a SD memory card
1. Open the cover in the rear of the camera.
(SNP-6200)
Using the screw driver, loosen 4 screws by turning them
counterclockwise and separate the dome cover.
(SNP-6200H)
2. Push the SD memory card in the direction of the
arrow shown in the diagram.
Do not insert the SD memory card while it's upside down
`
J
by force. Otherwise, it may damage the SD memory card.
42_ installation & connection