Command-Line Entries - VeriFone Vx810 Reference Manual

F A
ILE UTHENTICATION
VeriShield File Signing Tool
NOTE
Command-Line
Entries
86
V X 810 R G
EFERENCE
The following image shows the FileSign dialog box.
Figure 32 FileSign Dialog Box
If the entry of a signer password is a required input, a secondary dialog box is
displayed to enter and confirm the password. Please also note that a signer
password is required for a deployment device, but not for a development device.
The following table lists the switches that make up the command-line mode syntax
for the VeriShield File Signing Tool.
Table 15 Command-Line Mode Switches for VeriShield File Signing
Tool
Switch Description
-C, -c Signer certificate file name (*.crt).
-K, -k Signer private key filename
(*.key).
-P, -p Signer password for decrypting
the signer private key.
UIDE
a
Requirements
Required input for development
devices and deployment devices.
Use the VXSIGN.CRT default
signer certificate for development
devices.
Use the signer certificate issued
by the VeriFone CA for
deployment devices.
Required input for development
devices and deployment devices.
Use the VXSIGN.KEY default
signer private key for
development devices.
Use the signer private key
provided by the VeriFone CA for
deployment devices.
Required input only for
deployment devices.
The VeriFone CA issues and
securely conveys this password
to an authorized signer.