Establishing Communication; Connecting By Telephone Line - VeriFone V200c Installation Manual

S
ETUP

Establishing Communication

NOTE
Establishing
Communication
Connecting by
Telephone Line
WARNING
18
V200 V400 I
C AND C
The Multi-Communication port supplies 11.6 V / 500 mA to power accessories
(PIN pads and powered RS-232 devices). It is SW configurable to Host or Client
and supplies 5 V, 500 mA to external USB devices.
For information on how to attach peripheral devices, see
Devices.
You can connect V200c and V400c terminals to a telephone line and/or Ethernet
cable. On V200c and V400c Plus units, you can also connect via Wi-Fi or
Bluetooth.
Connect the telephone cord to the communication port on the terminal, then route
it directly to a telephone wall jack (see
the line is dedicated to the terminal.
Figure 4 Direct Telephone Connection
To reduce the risk of fire, use only No. 26AWG or larger UL Listed or CSA
Certified Telecommunication Line Cord.
G
NSTALLATION UIDE
Connecting Optional
Figure 4). This is a direct connection and