VeriFone Vx810 Reference Manual page 60

S M
YSTEM ODE
System Mode Menus
60
V X 810 R G
EFERENCE
Table 9 System Mode Menu 2
Display
SYS MODE MENU
SYSTEM INFO F2
DIAGS AND LOGS F3
SYS MODE DIAGS
REMOTE DIAGS F2
SYS MODE FILE
FILE GROUP nn
LOAD DBMON.OUT
SYSTEM MODE FILE
GROUP nn PASSWORD
_ _ _ _ _ _ _ _ _ _
TERMINAL INFO
SYS MODE MENU 2
MEMORY FUNCTIONS F2
TERMINAL INFO F3
SYS MODE MENU
SYSTEM INFO F2
DIAGS AND LOGS F3
UIDE
(continued)
Action
To perform system diagnostic tests and view log
information, select
To use the debugging tool, select
The debugging tool is included in the SDK, but is not
stored in the terminal memory of a factory unit. It
DEBUGGER F3
must be signed, downloaded, and authenticated
before it can be used.
Type the Group ID (valid values are 1 to 15) of the
files you want to debug. Then press
This message is displayed when the debugger tool
is run.
To continue, enter the required password.
DIAGS AND LOGS
To view device configuration information, select
TERMINAL INFO (F3)
To abort any action at any step, press
CLOCK F4
To perform system diagnostic tests and view log
information, select
DIAGS AND LOGS (F3)
DEBUGGER (F3)
ENTER
ERROR LOG
.
DIAGS AND LOGS (F3)
.
.
.
.
CANCEL
.