VeriFone Vx810 Reference Manual page 27

4
Install the metal plate onto the back of the RFID canopy and V
The metal plate has two tabs at the wide end that fit into slots in the V
NOTE
module, and two tabs at the narrow end that fit into ribs in the V
SD card compartment.
Figure 9
5
Use the locking screws to lock the metal plate into position.
First insert the fine-threaded black machine screw into the V
NOTE
install the 3 sharp-threaded self-tapping machine screws into the V
module. The self-tapping screws will require a significant amount of force to
install. Use the appropriate-sized screwdriver to avoid damaging the screw
heads or the V
Figure 10
Installing the Metal Plate
x x
810 PIN pad and V 810 CTLS module.
Installing the Locking Screws
S
ETUP
Options
x
810.
x
810 CTLS
x
810 PIN pad's
x
810 PIN pad. Then
x
810 CTLS
X
V 810 R G
EFERENCE UIDE
27