VeriFone Vx810 Reference Manual page 128

P D
ERFORMING OWNLOADS
Back-to-Back Application Downloads
NOTE
128
V X 810 R G
EFERENCE
Back-to-back downloads require that one device, the sending device, be loaded
with the required applications. The receiving device is the receiving device. The
procedure assumes the following:
•
The receiving device has no applications loaded.
•
There is enough memory in the receiving device to complete the download.
The receiving device does not display an error message if there is not enough
memory to complete the download. However, the sending device displays
DOWNLOAD INCOMPLETE
•
You are performing a full download
Table 20 Back-to-Back Application Download Procedure
Step Display
1 Connect a MOD10 cable (P/N 05651-XX) between the RS-232 serial ports of
the devices using a UART Dongle connected to each device. Then start up
both devices.
2 (Application Prompt)
or
DOWNLOAD NEEDED
GO FILE NOT FOUND
3 SYSTEM MODE ENTRY
PASSWORD
_ _ _ _ _ _ _ _ _ _
4 SYS MODE MENU 1
EDIT PARAMETERS F2
SYS MODE DOWNLOAD Gnn
SYS MODE DOWNLOAD Gnn
UIDE
before returning to
SYS MODE MENU 2
Action
After start up, the sending device displays the
application prompt; while the receiving device
displays
For both devices, enter system mode by
simultaneously pressing F2 and F4.
For both devices, enter the default system
password "Z66831
as:
1 ALPHA ALPHA 6 6 8 3 1
For the receiving device, select
. Enter the system mode password when
(F3)
prompted.
DOWNLOAD F3
RESTART F4
Select
SINGLE-APP (F3)
SINGLE-APP F3
MULTI-APP F4
Select
FULL (F3)
FULL F3
PARTIAL F4
.
.
DOWNLOAD NEEDED
.
" This password is entered
, then press
DOWNLOAD
.
.
.
ENTER