VeriFone Vx810 Reference Manual page 145

SYS MODE CLEAR
CLEARING RAM
PLEASE WAIT
NOTE
SYS MODE DEFRAG
RECLAIMING FLASH
PLEASE WAIT
SYS MODE DOWNLOAD
DOWNLOADING NOW
SYS MODE ERROR LOG
TYPE
TASK
TIME
CSPR
PC
LR
ADDR
This message is displayed when you select
select
CLEAR GROUP_NN F2
specific file group (Group 1–15) or from the entire SRAM. This message remains
until the files within the file group or all files in SRAM are deleted.
If you select
CLEAR ALL FILES F3
the files stored in flash ROM – are erased. If you erase the main application
stored in the SRAM file system, the device displays
VeriFone copyright screen on device restart.
Clearing the SRAM does not erase the keyed variable settings stored in
protected CONFIG.SYS records – that is, in records that start with an asterisk (*).
This message is displayed when you select
in to perform defragmentation (coalesce) of the flash ROM
SYS MODE MENU 1
memory file system.
PLEASE WAIT
process. On successful completion, the device automatically restarts.
An application is being downloaded onto a receiving V
directly over a serial cable. This message is also displayed on the Target device in
a back-to-back download.
The device displays a series of asterisks (*) to indicate the progress of the
download (each asterisk represents 10% of the download). When ten asterisks
appear, the data transfer is complete.
This information appears when you select
or on system crash. Select
MENU 2
events. Select
ERROR LOG F3
developers interpret the cause of the most recent unrecoverable software error
that occurred on the device:
•
: The error type code.
TYPE
•
: The type of task that was currently executed.
TASK
•
: The clock time when the last error occurred in YYMMDDhhmmss format.
TIME
•
: The register that contains the processor and state condition code.
CSPR
•
: The register that holds the execution address.
PC
•
: The register that holds the return address of the function call.
LR
•
: Contains the illegal address that the application was trying to access.
ADDR
If you report a system error to VeriFone, you may be asked to provide the
information displayed on this screen. For detailed information about the error log
function and the terms listed above, please refer to the Verix V Programmers
Manual.
RAM FILES F2
or to clear files from the SRAM of a
CLEAR ALL FILES F3
, only the application files stored in SRAM – not
FLASH FILES F3
remains displayed during the defragmentation
ERROR & TMPR LOGS F4
TAMPER LOG F4
to display the following information which helps
S
YSTEM
Information Messages
in
SYS MODE MENU 1
after the
DOWNLOAD NEEDED
, followed by
DEFRAG F4
x
810 device from a host PC
in
SYS MODE
to view a list of possible tamper
X
V 810 R
EFERENCE
M
ESSAGES
and
145
G
UIDE