Back-To-Back Application Download Procedure - VeriFone Vx810 Reference Manual

Back-to-Back The back-to-back application download process consists of two main phases:
Application
1
Preparing a source V
Download
x
V
Procedure
2
Downloading application files from the sending device to a properly configured
receiving device.
Prepare Sending Device (PC-to-Device)
1
Configure the host PC for an application download operation to the sending
device:
•
•
•
2
Configure the sending device to receive an application download from a PC:
•
3
Connect a cable between the RS-232 serial ports of the PC and the sending
device.
4
Initiate the file transfer on the PC.
5
From
download using a UART Dongle connected to each device.
The PC transfers files to the sending device.
The OS software on the receiving device is not affected by a back-to-back
application download.
OS files cannot be downloaded on a back-to-back operation.
Note:
An application upload does not overwrite the existing certificate tree on the
receiving device. Any downloaded certificate files are authenticated and added to
the tree.
x
810 device (transfers application files to the receiving
810 device).
Set the *FA variable (if present in the application) to 1.
Ensure that all certificates, *p7s files, applications, and other required files
are present.
Ensure that the download is exactly what you want your receiving device
to receive.
From
SYS MODE MENU 1
download.
on the sending device, select either a full or a partial
SYS MODE MENU 1
, set Group 1 and COM2 as the port to receive the
P D
ERFORMING OWNLOADS
Back-to-Back Application Downloads
X
V 810 R G
EFERENCE UIDE
125