VeriFone Vx810 Reference Manual page 54

S M
YSTEM ODE
System Mode Menus
54
V X 810 R G
EFERENCE
Table 9 System Mode Menu 2
Display
SYS MODE TERM INFO
CERT
HEAP
STACK
TERMINAL INFO
SYS MODE MENU 2
MEMORY FUNCTIONS F2
TERMINAL INFO F3
SYS MODE MENU
SYSTEM INFO F2
DIAGS AND LOGS F3
SYS MODE DIAGS
PRINTER DIAG F2
KEYBOARD DIAG F3
MAG CARD DIAG F4
SYS MODE DIAGS
SCREEN DIAG F2
SMART CARD DIAG F4
SYS MODE DIAGS
REMOTE DIAGS F2
UIDE
(continued)
Action
CERT indicates the certificate numbers
•
pertaining to the device. Pressing
234000
will show the other certificate numbers.
(F3)
772
HEAP indicates the memory designation used by
•
1708
the OS.
NEXT CERT F3
STACK indicates the memory set aside by the OS
•
for running tasks.
DIAGS AND LOGS
To view device configuration information, select
TERMINAL INFO (F3)
To abort any action at any step, press
CLOCK F4
To perform system diagnostic tests and view log
information, select
To run a test on the installed printer, select
DIAG (F2)
To run a test on the keypad, select
.
(F3)
To run a test on the magnetic stripe reader (MSR),
select
MAG CARD DIAG (F4)
To perform a diagnostic test on the screen, select
SCREEN DIAG (F2)
To perform a diagnostic test on the internal PIN pad,
IPP DIAG F3
select
IPP DIAG (F3)
To run a test on any inserted ICC or SAM cards,
select
SMART CARD DIAG (F2)
The
REMOTE DIAGS (F2)
VeriFone use only.
To use the debugging tool, select
DEBUGGER F3
HASH F4
To use the hash tool, select HASH (F4). The hash
tool is used for verifying the OS binary image.
.
DIAGS AND LOGS (F3)
.
KEYBOARD DIAG
.
.
.
.
functions are reserved for
DEBUGGER (F3)
NEXT CERT
.
CANCEL
.
PRINTER
.