Table of Contents
Advertisement
Symptom
The printout is
different from
what is
displayed on
the screen.
The light of
the <READY>
indicator is on
and blinking
but there is no
print output.
VarioLink 3550p Series User's Guide> 99
Reason/Action
Did you change the TrueType font settings to printer
fonts? Change to TrueType font printing for [Font
Substitution] on the [Setup] tab of the printer driver.
Online Help for the printer driver
There are jobs remaining in the printer. Cancel
printing or force the remaining data to be printed.
To forcibly print the job, press the <ON LINE> button
to set the printer in off-line mode, then press the
<FEED/SELECT> button. After the job has been
printed, press the <ON LINE> button again to return
the printer to online mode.
When a parallel/USB port is used, data may be
transmitted in the middle of a job depending on when
the <ON LINE> button is pressed. In this case,
subsequent print data received after the <FEED/
SELECT> button is pressed, will be recognized as a
new job. The data will be printed after the off-line
mode has been cancelled. Furthermore, it may not be
printed properly.
Cancelling printing: " Switching On and Off the Power"
(P. 15)
Advertisement
Table of Contents
