Table of Contents
Advertisement
5.
Squeeze the length guide and slide
it to the desired paper size (1).
Squeeze the right width guide and
slide it to the desired paper size
(2).
6.
Load the paper with the side to be
printed facing up and with all four
corners aligned.
Important
•
Do not place paper over the right width guide.
•
Do not load paper exceeding the maximum fill line or the
maximum capacity allowed.
•
Align the right width guide with the paper width correctly. If
the right width guide is not in place, the paper will not be
properly fed and this may cause paper jams.
7.
Close the lid of the paper tray and push the tray completely
into the printer.
Important
•
The lid of the tray must be firmly closed. If not, the paper
might become misaligned.
8.
Depending on the types and sizes of the loaded paper, you
need to configure settings on the control panel. Change the
paper type when non-plain paper such as recycled paper,
heavyweight paper or transparencies are loaded. Configure
the paper size when custom size paper is loaded.
Refer to:
•
Paper type and size that can be loaded: "Usable Paper" on
page 38
•
Setting paper size: "Setting Custom Paper Sizes" on
page 47
•
Setting paper type: "Setting Paper Types" on page 48
VarioLink 3550p Series User's Guide> 45
Advertisement
Table of Contents
