Table of Contents
Advertisement
1.
Pull the paper tray out of the printer.
2.
While pushing the retard part (see
right diagram) down (1), widen the
tab on the feed roll to loosen it (2)
and then slowly remove the feed
roll from the shaft of the paper
tray (3).
3.
Wipe the rubber parts with a wet
but well-wrung soft cloth.
4.
Turn the short tab of the feed roll
to the right and slowly push it onto
the shaft of the paper tray.
By aligning the slot of the feed roll
with that of the shaft, push the
feed roll completely in so that the
short tab fits into the slot of the
shaft.
5.
Push the paper tray completely into the printer.
VarioLink 3550p Series User's Guide> 134
Advertisement
Table of Contents
