Pcl Emulation - Oce VarioLink 3550p User Manual

PCL Emulation

The PCL Emulation provides access to the PCL settings and
functions. Use the following procedure to enter PCL Emulation Menu:
1. Press the MENU button on the control panel.
2. Press the < > button until the text "PCL Emulation" is
shown on the first line of the display.
3. Press the < > button to enter the PCL emulation menu.
4. Press the
submenus.
5. Press the < > button to enter the submenu.
Use the procedures in the following table to access and change the
PCL Emulation settings:
Submenus
Font Source
This submenu
allows you to
choose a font
source.
Font No.
This submenu
allows you to set
the font number.
Font Pitch
This submenu
allows you to
change the font
pitch of text.
Font Point Size
This submenu
allows you to
change the point
size of text.
Symbol Set
This submenu
allows you to
choose a symbol
set.
VarioLink 3550p Series User's Guide> 65
buttons to move through the
< > or < >
Default Available
Setting Settings
Internal Internal
Compact Flash
User Flash
Disk Drive
50 Available Fonts
10.00 0.08 - 100.00
12.00 1.00 - 1008.00
10U:PC-8 CP437 See Appendix A
for a complete
list of all the
available symbol
sets
Procedure for
Changing Setting
Press < > or < > buttons
to scroll through the
selections.
Press <SELECT> to save the
selection.
Press < > or < > buttons
to scroll through the
selections.
Press <SELECT> to save the
selection.
Press < > or < > buttons
to scroll through the
selections.
Press <SELECT> to save the
selection.
Press < > or < > buttons
to scroll through the
selections.
Press <SELECT> to save the
selection.
Press < > or < > buttons
to scroll through the
selections.
Press <SELECT> to save the
selection.