Table of Contents
Advertisement
2.
Hold the drum/toner cartridge by
the grip and pull it out slowly.
Note
• To prevent the toner from
dirtying the floor, lay a piece of
paper on the floor first before
putting the drum/toner cartridge
down.
3.
Take the new drum/toner cartridge out of the packaging box
and shake it 7 to 8 times as shown in the diagram.
Important
•
If the toner is not evenly spread out, the print quality may
be reduced. Also, if you did not shake the drum/toner
cartridge well, there may be operating noise or the interior
of the cartridge may be damaged during operation.
•
Do not touch the surface of the photosensitive drum.
4.
Place the drum/toner cartridge on a flat surface and pull out
the seal horizontally.
Important
•
When pulling out the seal, pull it out horizontally. The tape
might break if it is pulled out diagonally.
•
After the seal has been pulled out, do not shake or bump
the drum/toner cartridge.
VarioLink 3550p Series User's Guide> 120
Advertisement
Table of Contents
