Table of Contents
Advertisement
3.
From [Job Options] tab in the [Job Type] group, select
[Secure Print].
4.
In the [Job Identification] group, enter a name at [Job
Name]. A job name must be entered. The job name will be
used at the printer to retreive the job.
5.
Enter a password in the [Job Identification] group at [Job
Pin].
Enter four numeric characters.
6.
Click [OK].
7.
Click [Print] in the [Print] dialog box to start printing.
The document will be stored in the printer.
At the Control Panel
This section explains the procedure to print data stored in the printer
by Secure Print.
Note
• You can also delete, without printing, secure print data
stored in the printer.
Refer to:
"Print Jobs Menu" on page 55
1.
Press the <Menu> button.
2.
Check that [Print Jobs Menu] is displayed and then press the
< > button.
3.
Press the < > or < > button until the desired digit of the
Password (PIN number) is displayed, then press the < >
button.
4.
Repeat step 3 until all four digits of the password are
displayed.
5.
Press the <SELECT> button.
6.
Press the < > or < > button until the desired document is
displayed and then press the < > button.
7.
Input the number of copies desired, then press <Select>.
8.
After printing, the job is deleted.
9.
Press [Cancel] to exit the menu.
VarioLink 3550p Series User's Guide> 28
Advertisement
Table of Contents
