Table of Contents
Advertisement
Symptom
Paper cannot
be fed.
Paper jam.
Multiple
papers are
fed.
Papers are fed
at an angle.
Paper is
wrinkled.
VarioLink 3550p Series User's Guide> 101
Reason/Action
Is the paper correctly set? Load the paper correctly.
For labels, transparencies or envelopes, fan them well
first to allow air to enter between each sheet before
loading.
" Loading Paper in a Paper Tray" (P. 44)
Is the paper damp? Replace with paper from a new
ream.
" Loading Paper in a Paper Tray" (P. 44)
Is the correct type of paper used? Load the correct
type of paper.
" Usable Paper" (P. 38)
Is the paper tray set correctly? Push the paper tray
completely into the printer.
Is the printer placed on a flat location? Place the
printer on a stable surface.
Setup Guide Safety Notes
Are the paper tray guides set in the correct positions?
Set the length guide and right width guide in the
correct positions.
" Loading Paper in a Paper Tray" (P. 44)
Have you used any picture papers? Clean the feed
roll.
" Cleaning the Feed Roll" (P. 133)
Papers are fed in more than 1 sheet. Multiple feeding
of papers may occur before the sheets of paper loaded
in the tray are used up. Fan the paper to be loaded
and load again. Replenish paper only when all the
sheets of the loaded paper are used up.
Advertisement
Table of Contents
