Table of Contents
Advertisement
1.
Load the envelopes in the portrait orientation so that the
flaps are turned to the right side.
2.
Slide the length guide and right width guide to the size of the
loaded envelopes.
3.
On the control panel, change the paper type to [Envelope].
For details, refer to "Setting Paper Types" on page 48.
4.
On the control panel, change the paper size of the tray to
[COM-10 Envelope]. For details, refer to "Setting Custom
Paper Sizes" on page 47.
Printing on Envelopes
To print on envelopes, display the [Tray/Output] tab and [Basic] tab.
This section explains the procedure using WordPad on Windows XP
as an example.
Note
• The way to display the printer properties dialog box
differs according to the application software. Refer to
the manual of each application software.
1.
From the [File] menu, select [Print].
2.
Select this printer from the drop down list and click
[Properties].
3.
Click the [Setup] tab.
4.
Select the loaded paper tray from [Source] or click the
[Media Type] and then select [Com10].
5.
Click [OK].
6.
Click [Print] in the [Print] dialog box to start printing.
VarioLink 3550p Series User's Guide> 21
Advertisement
Table of Contents
