Table of Contents
Advertisement
On the printer driver, set the custom size in the [Paper Size] dialog
box. This section explains the procedure using Windows XP as an
example.
Note
For Windows NT 4.0/Windows 2000/Windows XP, only users with
administrator's rights can change the settings. Users without the
rights can only check the contents.
1.
From the [File] menu, click [Print].
2.
Select [Properties] then select the [Setup] tab.
3.
Select Option as needed: Source, Media Type, etc.
4.
You may select a previously stored custom size from the list
or you may add an additional custom size.
5.
To add a new custom size:
A.
Select paper feed options.
B.
Select Custom Size.
C.
In the Name Field, Type a name for your custom size.
D.
Click on the unit of measure radio button for the units
you would like to use (mm for millimeters or inch for
inches.)
E.
In the width field, enter the width of the custom size
paper.
F.
In the length field, enter the length of the custom size
paper.
G.
Click add to store the new custom size.
H.
Click OK to close the Dialog Box.
Note
You may use the modify selection to change a previously stored
custom size.
Note
You may use the Delete Selection to delete a previously stored
custom size.
VarioLink 3550p Series User's Guide> 25
Advertisement
Table of Contents
