Oce VarioLink 3550p User Manual page 79

Submenus Default
Setting
Duplex Y Adjust 8
This submenu
fine adjusts the
registration in
the Y axis.
Auto Resize Disable
This menu will
scale the output
of a job to the
size selected.
PCL Tray1 ID# 0001
PCL escape
sequence
parameter value.
PCL Tray2 ID# 0004
PCL escape
sequence
parameter value.
PCL Tray3 ID# 0005
PCL escape
sequence
parameter value.
VarioLink 3550p Series User's Guide> 79
Available Procedure for
Settings Changing Setting
0 to 15
Press <
number) to move the image
to the down or press < >
(decrease number) to move
the image to the up.
Press <SELECT> to save the
selection.
Enable
Press <
Disable
toggle between Enable and
Disable.
Press <SELECT> to save this
setting.
0000 to 9999
Press <
to increase or decrease the
digit in the selected position.
Press the <
digit and move to the next
position
Press <SELECT> after
changing the last digit to
save this setting.
0000 to 9999
Press <
to increase or decrease the
digit in the selected position.
Press the <
digit and move to the next
position
Press <SELECT> after
changing the last digit to
save this setting.
0000 to 9999
Press <
to increase or decrease the
digit in the selected position.
Press the <
digit and move to the next
position
Press <SELECT> after
changing the last digit to
save this setting.
> (increase
> or < > to
> or < > buttons
> to select the
> or < > buttons
> to select the
> or < > buttons
> to select the