Table of Contents
Advertisement
For Windows NT 4. 0/Windows 2000/Windows XP
When the printer is not printing
Cause
Incorrect IP address.
When [LPD Spool] is
set to [Memory], the
print data sent from a
computer in a single
print instruction has
exceeded the upper
limit of the receiving
capacity.
An irrecoverable error
has occurred during
printing.
The transport
protocol is different
from that of the
computer.
VarioLink 3550p Series User's Guide> 114
Verification
Ask your network
administrator to
check that the IP
address is correct.
Check the memory
capacity of [LPD
Spool] and compare it
with the print data
which was sent in the
single print
instruction.
Check if an error is
displayed on the
control panel.
Check the selected
transport protocol.
Action
Specify the correct IP
address for the
printer.
1. If a single file of
print data has
exceeded the upper
limit of the memory
capacity, divide the
file into smaller ones
and try again.
2. If multiple files
have exceeded the
upper limit of
memory capacity,
reduce the number of
files to be sent at one
time.
Switch off and then
on the printer.
Select the same
transport protocol as
that of the computer.
Advertisement
Table of Contents
