Table of Contents
Advertisement
Printing on Transparencies
Loading Transparencies
Load transparencies in trays 1 to 4.
ImportantImportant
•
Transparencies with white frames or full-color
transparencies cannot be used.
The way to load transparencies in the paper tray is the same as the
way to load standard size paper. For details, refer to " Loading Paper
in a Paper Tray" (P. 44).
You must also set paper type for the paper tray to [Transparency]
on the control panel.
Refer to " Setting Paper Types" (P. 48) to change the setting.
Printing on Transparencies
To print on transparencies, click on [Properties] from the [File]
[Print] menu, click the [Setup] tab. This section explains the
procedure using WordPad on Windows XP as an example.
Note
• The way to display the printer properties dialog box
differs according to the application software. Refer to
the manual of your respective application software.
• Printing transparencies continuously may lead to the
output transparencies sticking to each other. As a guide,
remove the transparencies from the output tray after
about 20 sheets and then fan them to lower their
temperatures.
1.
From the [File] menu, select [Print].
2.
Select this printer as the printer to be used and click
[Preferences].
3.
Click the Media Type drop down box and click on
transparencies.
4.
Select the loaded paper tray from Source Drop down and
click on the tray that contains the transparencies.
5.
Click the Paper Size drop down.
VarioLink 3550p Series User's Guide> 22
Advertisement
Table of Contents
