Table of Contents
Advertisement
Navigating the Control Panel Menus
When you press the MENU button on the control panel, you enter the
printer's menu system. At that point, the first line of the display lists
the active menu. You can change the active menu by pressing the
< > or < > button or by pressing the MENU button.
If you press the < > button repeatedly, the first line of the display
cycles through the main menus in the following order:
•
Print Jobs Menu
•
Information Menu
•
Print Menu
•
Media Menu
•
Sys Config Menu
•
PCL Emulation
•
FX Emulation
•
Parallel Menu
•
Serial Menu
•
USB Menu
•
Network Menu
•
Sys Adjust Menu
•
Date/Time Menu
•
Maintenance Menu
•
Usage Menu
•
Flash Menu
•
Disk Menu
•
Comp FLASH Menu
•
Job Accounting
•
Spooling
Menus and submenus may or may not be displayed, depending on
the options installed.
The following text describes the sequence of push buttons and
display messages that would allow you to print the PS (PostScript)
font list. This example illustrates the basic relationship between
menus and submenus and demonstrates how the < >, < >,
SELECT, and Cancel buttons help you to navigate through the
menus.
1.
Press the MENU button on the control panel.
2.
The LCD will display "Print Jobs Menu" on the first line of
the display.
VarioLink 3550p Series User's Guide> 52
Advertisement
Table of Contents
