Table of Contents
Advertisement
2.
Select this printer from the drop down list and click
[Properties].
Note
• [Copies] must be set to at least two before [Proof Print]
can be selected.
3.
On the [Job Options] tab, set [Copies] to at least two.
4.
Select [Proof and Print] from [Job Type].
5.
In the [Job Identification] group, enter a name at [Job
Name]. The default job name is "blank", if left blank the job
may fault.
6.
Enter a password in the [Job Identification] group at [Job
Pin].
Enter four numeric characters.
7.
Click [OK].
8.
Click [Print] in the [Print] dialog box to start printing.
At the Control Panel
This section explains the procedure to print and delete data stored
in the printer by Proof Print.
Refer to:
"Print Jobs Menu" on page 55
1.
Press the <Menu> button.
2.
Press the < > or < > button until [Print Jobs Menu] is
displayed and then press the < > button.
3.
Press the < > or < > button until the desired digit of the
Password (PIN number) is displayed, then press the < >
button.
4.
Repeat step 3 until all four digits of the password are
displayed.
5.
Press the <SELECT> button.
6.
Press the < > or < > button until the required document is
displayed and then press the <Select> button. The proof
document will print.
VarioLink 3550p Series User's Guide> 30
Advertisement
Table of Contents
