Nortel CallPilot 100 User Manual page 20

Messaging
The mailbox can have one or more information messages, which contain an alphanumeric tag and
a descriptive string. To reduce the number of report output lines, a mailbox setting or condition is
only reported if it differs from the default setting or normal condition.
Possible tags include:
Table 4 Mailbox Information Tags
Tag
UNINIT
NONAMEREC
NOGREET
LOCKED
NOMWI
FULL
NOACCEPT
NOADDRESS
ALTDN1
ALTDN2
EXPRLINE
ATDT
XFERS Screened
METHOD, LIMIT
RETRY, INT
OPN/RNPHNOE
OPN/RNPAGER
OPN/RNEXT
OPN/RNSTATUS
TRANSF
FAXPRE
SELECT, SIZE
AMIS, MBOX
SITE, MBOX
Description
The mailbox is not initialized.
The mailbox is initialized, but a name is not recorded.
The mailbox is initialized, but a primary greeting is not recorded.
The mailbox is disabled because the number of incorrect password
attempts is exceeded.
The mailbox has a primary extension, but Message Waiting is disabled.
The mailbox is full.
The subscriber has set the mailbox to not accept messages.
The address is not specified.
Alternate extension 1 is defined.
Alternate extension 2 is defined.
An Express Messaging line is defined. Only available on CallPilot 150.
A Target Attendant is defined.
Transfers are screened.
Blind transfers are normal and are not shown.
The delivery method and maximum number of selections for a Fax On
Demand mailbox.
The number of retries and interval in minutes for a Fax On Demand
mailbox.
Off-Premise Notification to a telephone.
Off-Premise Notification to a pager.
Off-Premise Notification to an extension.
Current status of Off-Premise Notification.
The telephone number used when Outbound Transfer is set to an
external destination.
Preset Fax destination – BCM 2.5 only.
For each document in a Fax On Demand mailbox, lists selection ID and
size list in equivalent message minutes – BCM 2.5 only.
System access phone number and target mailbox number of a AMIS
Network Delivery mailbox.
Site address of a Network Delivery mailbox.
21
Norstar