Running In - BMW HP2 Sport Rider's Manual

light comes on, and that it shows
6
red and yellow.
Have the malfunction corrected
88
as soon as possible by a spe-
cialized workshop, preferably
an authorized BMW Motorrad
retailer.
ABS self-diagnosis
The readiness for operation
z
of the BMW Motorrad ABS is
checked by the self-diagnosis.
Self-diagnosis is performed
automatically when you switch on
the ignition. To check the wheel
sensors, the motorcycle must
drive faster than 3 mph (5 km/h).
Phase 1
Checking the diagnosable
system components while
stopped.
ABS warning light flashes.
Phase 2
Checking wheel sensors while
starting off.
ABS warning light flashes.
ABS self-diagnosis
completed
OE
The ABS warning light goes
out.
If an ABS fault is indicated after
the ABS self-diagnosis is com-
pleted:
Continued driving is possible.
It must be noted that the ABS
function is not available.
Have the malfunction corrected
as soon as possible by a spe-
cialized workshop, preferably
an authorized BMW Motorrad
retailer.

Running in

The first 600 miles
(1000 km)
While running in the motorcy-
cle, vary the throttle opening
and engine-speed range fre-
quently.
Try to do most of your rid-
ing during this initial period on
twisting, fairly hilly roads, avoid-
ing high-speed main roads and
highways if possible.
Exceeding the specified en-
gine speeds while running
in will lead to increased engine
wear.
Adhere to the specified engine
run-in speeds.
Do not exceed the engine run-
in speeds.
Engine break-in speed
-1
<5000 min