General Instructions; Onboard Toolkit - BMW HP2 Sport Rider's Manual

General instructions

10
The 'Maintenance' chapter de-
scribes work involving the check-
118
ing and replacement of wear
parts that can be performed with
a minimum of effort.
If special tightening torques are
to be taken into account for
assembly, these are listed. An
overview of all required tightening
torques is contained in the
chapter "Technical Data".
Information on additional main-
z
tenance and repair work is con-
tained in the Repair Manual on
DVD/CD-ROM also included with
your motorcycle.
Special tools and thorough spe-
cialized knowledge are required
to carry out some of the work
described here. If you are in
doubt, consult a certified work-
shop, preferably your authorized
BMW Motorrad retailer.

Onboard toolkit

Underneath seat
1 Reversible screwdriver in-
sert
with Phillips and Torx T25
blade
2 Screwdriver handle
3 Tool for oil cap
for opening oil fill location
4 Reversible screwdriver in-
sert
with Phillips and straight
blade
Service set
1 Pull-out tool holder
for mounting all tools via
adapters and for removing
spark plug
2 1/4" bits
Bits of various sizes
3 Torx E12 socket wrench
insert
4 Flashlight
5 3/8" Allen key, 22 mm
for removing quick-release
axle on front wheel
6 large hook wrench
for adjusting spring preload