Rear-Wheel Stand - BMW HP2 Sport Rider's Manual

Apply uniform pressure to push
front wheel stand down and
raise motorcycle.

Rear-wheel stand

Installing rear-wheel
stand
Set desired height of rear
wheel stand using bolt 1.
Remove the lock washer 2; to
do so, press the unlock but-
ton 3.
Push the rear-wheel stand from
the right onto the rear axle.
Apply the retaining disk from
the left; to do so, press the un-
lock button.
Secure motorcycle with left
hand and place right hand on
lever of rear wheel stand 4.
10
133
z