BMW HP2 Sport Rider's Manual page 130

10
128
Press brake pads in brake
caliper 2 apart slightly by
rocking back and forth A in
relation to brake disks 3.
z
Carefully pull brake calipers
back and out until clear of
brake disks.
with BMW Motorrad ABS
Remove screw 1 and take ABS
sensor out of hole.
Place motorcycle on an auxil-
iary stand; BMW Motorrad rec-
ommends BMW Motorrad rear
wheel stand.
Installing rear-wheel stand
( 133)
Raise front of motorcycle until
the front wheel can turn freely.
BMW Motorrad recommends
the BMW Motorrad front-wheel
stand for lifting the motorcycle.
OE
Mounting front wheel stand
( 132)
Remove axle clamping screw 2.
Remove quick-release axle 3
while supporting wheel.
Place the front wheel in the
front wheel guide on the
ground.
Roll front wheel forward to re-
move.