BMW HP2 Sport Rider's Manual page 45

SET button 1 pressed once
each time.
Each time the button is
pressed, the next LED lights up
and the corresponding engine
speed threshold is shown.
Press SET button repeatedly
until desired LED lights up.
The number of the active LED
is shown at position 1.
Press and hold SET button
until thousands place 2 flashes.
Press SET button repeatedly
until desired number is shown.
Press and hold SET button
until hundreds place 3 flashes.
Press SET button repeatedly
until desired number is shown.
Press and hold SET button
until hundreds place no longer
flashes.
The desired display duration
has been applied.
4
43
z