Spring Preload - BMW HP2 Sport Rider's Manual

To set factory setting: align
footrests toward front.

Spring preload

Setting
The spring preloads on the front
and rear wheel must be adjusted
to the weight of the driver. The
negative spring travel is set via a
differential measurement.
Adjusting spring preload
on front wheel
Remove screws 1 on left and
right.
Take off fuel tank cover toward
rear.
Remove screw 1 from air in-
take snorkel.
Release both retaining brack-
ets 2 by pressing on their rear
ends and pull out.
Remove intake snorkel.
5
67
z