Clutch; Shift Lever - BMW HP2 Sport Rider's Manual

As an alternative, the ignition
5
can also be switched off and
then on again.
62
If the ABS light continues
to light up after switching
the ignition off and then on again,
an ABS fault has occurred.

Clutch

Adjusting clutch lever
If the position of the clutch
z
fluid reservoir is changed,
air can enter the clutch system.
Do not reposition the handlebar
controls on the handlebars or the
handlebars in their mounts.
Adjusting the clutch lever
while driving can lead to
accidents.
Only adjust the clutch lever when
the motorcycle is stationary.
Turn adjusting screw 1 clock-
wise.
The adjusting screw has a
limit position and can be
turned more easily when you
press the clutch lever forward.
Distance between handlebar
grip and clutch lever increases.
Turn adjusting screw 1 coun-
terclockwise.
Distance between handlebar
grip and clutch lever decreases.

Shift lever

Adjusting shift lever
Slacken screw 1.
Turn foot piece 2 into desired
position.
A foot piece adjusted too
high or too low can cause
problems when shifting. In case
of shifting problems, check the
adjustment of the foot piece.
Threaded fasteners not
tightened to the specified
torque can work loose or their
threads can suffer damage.
Always have the tightening