Running In - BMW R 12 nineT 2023 Rider's Manual

Phase 2
Pullaway test of the dia-
gnosis-compatible system
components.
slow-flashes.
DTC self-diagnosis completed
The DTC symbol no longer
shows.
Observe all the indicator and
warning lights.
DTC self-diagnosis not
completed
The DTC function is not
available, because self-
diagnosis did not complete.
(The motorcycle has to reach
a defined minimum speed
with the engine running for
the wheel sensors to be
checked: min 5 km/h)
If an indicator showing an DTC
fault is displayed after DTC
self-diagnosis completes:
You can continue to ride.
Bear in mind that the DTC
function is not available at all,
or the functionality might be
subject to certain restrictions.
Have the fault rectified as
quickly as possible by a spe-
cialist workshop, preferably an
authorised BMW Motorrad re-
tailer.

RUNNING IN

Engine
Until the first running-in
check, vary the throttle
opening and engine-speed
range frequently; avoid riding
at constant engine rpm for
prolonged periods.
Try to do most of your riding
during this initial period on
twisting, fairly hilly roads.
Comply with the running-in
speeds.
Running-in speed
<5000 min -1
reading 0...1000 km)
Note the mileage after which
the running-in check should
be carried out.
Mileage until the first
running-in check
500...1200 km
Brake pads
WARNING
New brake pads
Longer stopping distance, risk
of accident
Apply the brakes in good
time.
125
(Odometer