Removing Front Wheel - BMW HP2 Sport Rider's Manual

sizes due to conversion to oth-
ers than the wheels installed as
standard equipment can serious-
ly affect the control comfort of
these systems.
The sensor wheels required for
wheel speed detection must also
match the ABS system installed
and may not be replaced.
If you want to equip your mo-
torcycle with different wheels,
please speak to a specialized
workshop, and preferably a BMW
Motorrad retailer. In some cas-
es the data stored in the control
units can be adapted to the new
wheel sizes.

Removing front wheel

Make sure ground is level and
firm and park motorcycle.
with BMW Motorrad ABS
Unclip retaining clip of ABS
sensor cable on brake line.
Mask off area of wheel rim that
could be scratched in process
of removing brake calipers.
OE
Once the calipers have
been removed, there is
a risk of the brake pads being
pressed together to the extent
that they cannot be slipped back
over the brake disk on reassem-
bly.
Do not operate the handbrake
lever when the brake calipers
have been removed.
Remove mounting bolts 1 of
brake calipers on left and right.
10
127
z