No Answer; Conversion Error - Lexmark 9500 Series User Manual

No Answer

These are possible solutions. Try one or more of the following:
U
SE PHONE LINE CHECKLIST
•
Resend the fax. There may have been a problem with the quality of the telephone line connection.
•
Place a test call to the telephone number to which you want to send a fax to make sure that it is working
correctly.
M
AKE SURE THE PRINTER DETECTS DIAL TONE
•
See "Sending a fax while listening to a call (On Hook Dial)" on page 154.
•
Check the Dial Method setting.
1
Listen for a dial tone. If you hear a dial tone, but the printer hangs up without dialing, this means it did not
recognize the dial tone.
2
From the control panel, press
3
Press .
4
Press or
5
Press .
6
Press or
7
Press .
8
Press or
9
Choose your dialing method.
10
Press .

Conversion error

When attempting to attach a file, certain software programs cannot be launched by the Fax Solutions Software and
yield an error message. If this happens, try the following:
1
Close the Fax Solutions Software.
2
Manually launch the software program used to create the file, and then open the file.
3
From the software program, click File
The Print dialog appears.
4
From the Name drop-down menu, select the printer that begins with "Fax" followed by the name of your printer,
and then click OK.
The Send Fax dialog appears.
5
Follow the instructions on the Send Fax wizard.
When you get to step 3, select Printed Document from the Documents to Send list box, and then click Next.
6
Click Send to finish sending your fax.
or repeatedly until Fax is highlighted.
repeatedly until Fax Setup is highlighted.
repeatedly until Dialing and Sending is highlighted.
repeatedly until Dial Method is highlighted.
Print.
Troubleshooting
249